PRS-R-07 Smile Veneer

Description: Smile design veneer, thermoforming heat-activated.

Glaze Rule Final: R20 Soft Glaze must use soft

Q: What is 07 PRS-R-07 Smile Veneer used for?

A: Smile design veneer, thermoforming heat-activated.

Q: Does 07 PRS-R-07 Smile Veneer need R19 hard or R20 soft glaze?

A: Per final locked rule, 07 PRS-R-07 Smile Veneer uses R20 Soft Glaze must use soft. R19 for hard rigid, R20 for flexible elastic, Model and Casting no glaze.

Q: Is 07 PRS-R-07 Smile Veneer compatible with PMMA PEEK Composite?

A: R19 hard and R20 soft glaze can be extended to traditional PMMA PEEK composite materials, not only 3D printed resin. Good selling point.

Q: What is specification of 07 PRS-R-07 Smile Veneer?

A: 1kg per bottle, 405nm UV, ISO CE FDA certified, details as per catalog page.

Q: Can 07 PRS-R-07 Smile Veneer be stained with color glaze?

A: Yes, can be stained with ZonMed color glaze kit R01-R20, 20-color Kit A or 7-color Kit B R01 R02 R03 R04 R18 R19 R20 no R17, then seal with transparent glaze.

Q: What 3D printer brands and types are ZonMed resin materials compatible with?

A: ZonMed resin materials feature an open-system design compatible with standard 405nm UV light source 3D printers, supporting both LCD and DLP technologies. They are widely compatible with mainstream international and domestic dental 3D printer brands on the market, including:

Dental & Mainstream Brands (China): Fully compatible with HeyGears ，Phrozen， Prismlab , RayForm, LuxCreo, Anycubic , ELEGOO , Shining 3D , Flashforge , Piocreat, Uniz, and other open-source 405nm dental printers.

International Brands: SprintRay, Asiga, EnvisionTEC (Desktop Health),, 3DSystems (NextDent LCD series), BEGO, and Formlabs (applicable resin systems).