Q: What is PRS-P-S01 Sintering paste? What isfiring paste used for?
A: PRS-P-S01 is ZonMed firing paste / fuse paste / connection paste for zirconia and glass ceramic, used before sintering for zirconia crowns bridges connection, for adding contact, repairing, for pre-sintering staining? High strength bonding, natural aesthetic after sintering, for zirconia sintering furnace. Model PRS-P-S01 per boss.
Q: What is difference between PRS-P-S01 Sintering paste and CERAMIX STAIN G01-G20 low-temp glaze paste?
A: PRS-P-S01 Sintering paste is for BEFORE sintering, firing at high temperature 1480-1550C with zirconia sintering, for connecting zirconia, adding proximal contact, repairing small defects. CERAMIX STAIN G01-G20 is for AFTER sintering, low-temp glaze paste 750-800C for external staining of zirconia press ceramic glass ceramic. F01 high-temp sintering, G01-G20 low-temp glazing – different stages. Use F01 before sintering, G after sintering.
Q: Can PRS-P-S01 Sintering paste be used for zirconia? How to use?
A: Yes for zirconia crowns bridges, for connecting zirconia to zirconia, for adding contact points before sintering, for repairing minor cracks before sintering. Apply paste on zirconia green state or pre-sintered, then put into sintering furnace 1480-1550C sinter together, bonds naturally with high strength ≥ Maintains strength. After sintering can further stain with G01-G20 low-temp glaze paste.
Q: What are features of PRS-P-S01 Sintering paste? High strength bonding?
A: Features: High strength bonding with zirconia after sintering, no cracking, natural color after sintering compatible with zirconia, easy to apply paste form precise control, no deformation during sintering, for zirconia pre-sintered connection. For dental lab use with zirconia sintering furnace.
Q: Is PPRS-P-S01 Sintering paste compatible with PRS-S-C01-C04 CAD blocks and PRS-S-P01 P02 PRESS? Complete system?
A: Yes complete system: Own PRS-P-S01 Sintering paste for pre-sintering connection + own zirconia + own PRS-S-P01 HT 19 colors / P02 MT 6 colors / P03 LT / P04 MO opaque CAD blocks and PRS-S-C01 HT C02 LT PRESS + own CERAMIX STAIN G01-G20 low-temp glaze paste for after sintering external staining + own POLYFIX STAIN R01-R20 fluorescent except R20 for resin. Complete closed loop: F01 sintering paste (before) + G01-G20 glaze (after) + R01-R20 resin stain.
Q: What is firing temperature for PRS-P-S01? Does it need low-temp or high-temp?
A: PRS-P-S01 Sintering paste is high-temp, firing at zirconia sintering temperature 1480-1550°C depending on zirconia, not low-temp 730-800C. Low-temp is G01-G20 CERAMIX STAIN for after sintering. F01 sinters together with zirconia in same sintering cycle, no separate firing needed, saves time. After sintering, glaze with G19 FP fluorescence or G20 non-fluorescence at low-temp 730-800C.