ZONMED will exhibit at Swedental 2026, taking place November 11–13 at Svenska Mässan in Gothenburg, Sweden. Visitors can find us at Booth B05:72.

Zonmed invitation to Gothenburg Dental Exhibition, 11-13 November, Svenska Mässan Gothia Tower 1, Booth B05:72
Zonmed invites you to meet us in Gothenburg, Sweden, 11-13 November at Svenska Mässan Gothia Tower 1, Booth B05:72.


Swedental is Sweden’s leading dental exhibition, bringing together dental laboratories, clinics, and suppliers from across the Nordic region and beyond. Following our appearance at DenTech China 2026 in Shanghai in October, Gothenburg is the next stop on our exhibition calendar — and a chance to meet the Nordic dental community in person.
The PRS ecosystem, on display
At Booth B05:72, visitors will see the PRS ecosystem — our full range of dental 3D printing resins, covering the complete digital workflow from model to final restoration:
• Permanent Crown Resin (PRS-R-01) and Temporary C&B Resin (PRS-R-02) — our core crown materials, and the two products our customers ask about most.
• Clear Aligner Resin (PRS-R-14) — for directly printed clear aligners. It cures without nitrogen, in 3–5 minutes without yellowing, with a simple post-process: print, clean, cure for 1 minute, brush on soft gloss oil, and cure for 2 minutes.
• Surgical Guide Resin (PRS-R-11) and Night Guard Resin (PRS-R-13) — for guided surgery and occlusal appliances.
• Flexible Denture Base Resin (PRS-R-04) and Full Mouth Movable Base Resin (PRS-R-05) — for removable prosthetics.
• Planting Model Resin (PRS-R-18), along with our orthodontic, water-washable, and opposite-jaw model resins — for accurate, stable working models.
All resins in the PRS range are designed for open 385–405nm printing platforms, and we provide verified printing parameters for 18 mainstream printer brands, including Asiga, Formlabs, SprintRay, Ackuretta, and HeyGears.
Finishing the work: PolyFix and Ceramix
A printed restoration is only half the job. At the booth we will also show our two stain systems, which turn a printed part into a finished restoration:
• PolyFix — a resin stain system with 18 colours, plus diluent and hard and soft glazes, for characterizing crowns, denture bases, and gingiva on printed resin and PMMA.
• Ceramix — a ceramic stain paste system with 20 shades, plus a mixing liquid, for external staining of zirconia, glass ceramics, and press ceramics, with a firing range of 730–800°C.
Both systems will be on display with finished samples, so visitors can see the shade and surface quality directly rather than in a catalogue photo.
What to expect at Booth B05:72
Our team will be on site throughout the three days. Visitors can handle printed samples — crowns, models, surgical guides, and aligners — discuss printing parameters for their own printer model, and walk through staining and glazing workflows for the cases they work on every day. If you run a dental laboratory or a clinic already working with 3D printing, stop by for a conversation — or message us in advance to book a time at the booth.
Visit us:
• Event: Swedental 2026 (Odontologisk Riksstämma)
• Dates: November 11–13, 2026
• Venue: Svenska Mässan, Gothia Tower 1, Gothenburg, Sweden
• Booth: B05:72

Zonmed dental products and Gothenburg exhibition hall floor plan showing entrances and exhibition halls
Find Zoonmed at Booth B05:72 – Exhibition hall map with Entrance 2 and Entrance 5, Gothenburg, 11-13 November.


We look forward to seeing you in Gothenburg.